FAQ

Most frequent questions and answers

Tufit is available in dry free flowing powder form, Wet form for Interiors.

Tufit consists of high quality white cement & imported cementation polymers , high Quality acrylic polymers and specialty chemicals like biocide, inert fillers and other chemical additives.

 

Number of coats would depend on quality of surface receiving it, normally 2 coats are ideal.

 

Number of coats would depend on quality of surface receiving it, normally 2 coats are ideal.

 

Even plaster surface, in line and loose particles, oil stains should be removed with the help of wire brush, putty blade or emery stone.

 

Yes, Tufit Dry Cement Plaster has a unique formulation which makes it suitable for damp wall.

 

Yes, Tufit Dry Cement Plaster has a unique formulation which makes it suitable for application on moist surfaces.

 

Surface should be pre-wetted prior to application. This helps in providing a strong bond with substrate especially for Dry Cement Plaster and hot climates.

For normal application, thickness should be 1 mm to 1.5 mm is optimum.

Yes, Tufit provides a breathable surface and allows any trapped moisture to move out keeping the wall dry and clean.

 

All types water based paints including our paints (Surya) are suitable for finish coat on Tufit.

 

Prefer TUFIT Medium / Rough for interior : Prefer TUFIT Uniform for exterior to cover undulations.


Ideally the finished surface do not require any dressing by Emery Paper but if at all it is done, the paper should not be less than 500 number.

Although coverage would depend on surface Quality, in general, coverage for Tufit Dry is 12.5 to 15.5 KG/ 2 coats /Sft , for Tufit Wet is 7-10 KG/ 2 coats /Sft.

No, TUFIT Wet Mineral Plaster is not for instead of plastering. TUFIT Ready Mix Base coat plaster is suggestible instead of plastering.

Tufit is a much better product than POP as POP is extremely hygroscopic and is susceptible to the ingress of moisture, which damages the surface. As Tufit is cement based and water resistant such problems do not arise. More over the coverage of the paint is much more in case of Tufit.

Yes, TUFIT Ready Mix Base coat plaster is suggestible instead of plastering.

Suggested to apply PRIMER before the application of any kind of paint to get the uniform back ground, better hiding and to reduce the paint quantity.

TUFIT deluxe is suitable for the smoothness of the wall.

 

All types of texture can match exterior.

Budjet Exterior, Lawish is suitable for exterior decors.

 

Wall should be completely dry before priming / painting. Normally it takes 6 to 10 hr @ normal room temperate .

Lasya is the most economy product to cover middle class mankind

VAT 12.5% can imply for local sales: C.S.T 2% can imply for out of state sales against ‘c’ form.

 

Budjet Interior, Lasya & Delice is suitable for interior decors.

 

Yes, SURYA COLOURS is manufacturing all types of water based paints from start to end

 

Customer Care Representative
11-300, Surya Nagar, J.P.Road,
Piduguralla. Guntur Dist, Andhra Pradesh.
Phone : +91 8649- 255559.
Fax : +91 8649- 255559

LASYA which makes you to dance (DISTEMPER)

BUDJET which plans your budjet (EMULSION)

DELICE which makes you delightful (EMULSION)

LAWISH which makes you feel lavishness. (EMULSION)

INTERIOR COMBINATIONS:

BARE WALL » ROUGH PLASTERING (or) TUFIT ROUGH » SPONZE PLASTERING (or) TUFIT MEDIUM or UNIFORM » TUFIT WET MINERAL PLASTER or TUFIT DELUXE or TUFIT SPECIAL WHITE » PRIMER » LASYA or DELICE

EXTERIOR COMBINATIONS:

BARE WALL » ROUGH PLASTERING or READY MIX BASE COAT » SPONZE PLASTERING or UNIFORM » TUFIT EXTERIOR or DRY CEMENT PLASTER » PRIMER » BUDJET or LAWISH

TEXTURE COMBINATIONS:

EXTERIOR:

BARE WALL » ROUGH PLASTERING or READY MIX BASE COAT » SPONZE PLASTERING or UNIFORM » TUFIT SCRATCH or ROLLER » PRIMER » BUDJET or LAWISH

BARE WALL » ROUGH PLASTERING or READY MIX BASE COAT » SPONZE PLASTERING or UNIFORM » TUFIT EXTERIROR or DRY CEMENT PLASTER » PRIMER » BUDJET or LAWISH » TUFIT SPRAY TEXTURE.

INTERIOR:

BARE WALL » ROUGH PLASTERING or TUFIT ROUGH » SPONZE PLASTERING or TUFIT MEDIUM or TUFIT UNIFORM » TUFIT SCRATCH or ROLLER » PRIMER » LASYA or DELICE

BARE WALL » ROUGH PLASTERING or TUFIT ROUGH » SPONZE PLASTERING or TUFIT MEDIUM or UNIFORM » TUFIT WET MINERAL PLASTER or TUFIT DELUXE or TUFIT SPECIAL WHITE » PRIMER » DISTEMBER or DELICE » TUFIT SPRAY TEXTURE.

 1.Categories in TUFIT Wet

  • Wet Mineral Plaster
  • Builders Putty
  • Special White
  • Deluxe wall putty
  • Textures – Roller Finish, Scratch & Spray
  • TUFIT Gold, Copper & brownge (Metallic paints)

                1.Washable
                2.Medium
                3.Rough
                4.Crack Filler

2. Categories in TUFIT Dry :

  • Ready to Mix
  • Uniform
  • Dry Cement Plaster
  • Tile Fix
  • Exterior
  • Water Proofing
  • Slurry